[meta-ti] unable to fetch a repository mentioned in SRC_URI

Thu Aug 15 21:13:55 PDT 2013

On 16/08/13 15:09, Sundareson, Prabindh wrote:
> Is this resolved - were you able to generate the image ? I seem to be having a similar issue,

Sorry to hijack the thread, but on top of GIT problems last time, I had 
another similar issue this morning with SVN 
(svn://gcc.gnu.org/svn/gcc/branches;module=gcc-4_5-branch;protocol=http), not 
sure if it is related, but it definitely used to work!
I can checkout this branch manually, but inside bitbake it fails, the 
checkout is really done, but subversion returns with an error code, I 
suspect that this error code should be considered a warning (since the 
code has been checked out!).
It could potentially be a problem with gnome-keyring and pkcs#11 stuff 
as well (Ubuntu 13.04 "upgraded" to KUbuntu 13.04). I tried the 
"password-stores=" option in the [auth] section of ~/.subversion/config, 
but it didn't do the trick.

Regards,
Chris

>
> regards,
> Prabu
>
>
> -----Original Message-----
> From: meta-ti-bounces at yoctoproject.org [mailto:meta-ti-bounces at yoctoproject.org] On Behalf Of Dmytriyenko, Denys
> Sent: Thursday, August 15, 2013 1:00 AM
> To: Christian Gagneraud
> Cc: meta-ti at yoctoproject.org
> Subject: Re: [meta-ti] unable to fetch a repository mentioned in SRC_URI
>
> On Thu, Aug 15, 2013 at 08:28:37AM +1200, Christian Gagneraud wrote:
>> On 08/12/2013 06:27 AM, Denys Dmytriyenko wrote:
>>> On Tue, Aug 06, 2013 at 11:43:08AM +0000, Prathamesh P Ghanekar wrote:
>>>> Hello,
>>>>
>>>> I am trying to integrate meta-ti layer into the current yocto
>>>> project. I wish to build the image for pandaboard.
>>>>
>>>> I am adding another layer called meta-ivi in the yocto kernel which
>>>> provided functionality for in-vehicle infotainment systems. In the
>>>> meta-ivi layer, there is a recipe "foton-image", which builds GENIVI
>>>> compliant baseline image. Also, few recipes were masked to resolve the license issue.
>>>>
>>>> So, setting all the variables in the conf/local.conf and
>>>> conf/bblayers.conf file, I build the image as follows.
>>>>
>>>>
>>>> è bitbake foton-image
>>>>
>>>>
>>>> I ended up with following error, which indicates that there's a failure in fetching the repository.
>>>>
>>>> Here is the output log for your reference:
>>>>
>>>> prathamesh at mintos ~/workdir/poky-dylan-9.0.1/build $ bitbake
>>>> foton-image Loading cache: 100%
>>>> |###################################################################################################################################| ETA:  00:00:00 Loaded 1220 entries from dependency cache.
>>>>
>>>> Build Configuration:
>>>> BB_VERSION        = "1.18.0"
>>>> BUILD_SYS         = "i686-linux"
>>>> NATIVELSBSTRING   = "LinuxMint-14"
>>>> TARGET_SYS        = "arm-oe-linux-gnueabi"
>>>> MACHINE           = "pandaboard"
>>>> DISTRO            = "poky-ivi-systemd"
>>>> DISTRO_VERSION    = "4.0.2"
>>>> TUNE_FEATURES     = "armv7a vfp neon"
>>>> TARGET_FPU        = "vfp-neon"
>>>> meta
>>>> meta-yocto
>>>> meta-yocto-bsp
>>>> meta-ivi-4.0.2    = "<unknown>:<unknown>"
>>>> meta-ti           = "master:c14c386946e1ea341faeea292580e37d538d645d"
>>>>
>>>> NOTE: Resolving any missing task queue dependencies
>>>> NOTE: multiple providers are available for u-boot (u-boot,
>>>> u-boot-ti-staging)
>>>> NOTE: consider defining a PREFERRED_PROVIDER entry to match u-boot
>>>> NOTE: Preparing runqueue
>>>> NOTE: Executing SetScene Tasks
>>>> NOTE: Executing RunQueue Tasks
>>>> WARNING: Failed to fetch URL
>>>> git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protoco
>>>> l=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/inte
>>>> gration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>,
>>>> attempting MIRRORS if available
>>>> ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
>>>> Cloning into bare repository '/home/prathamesh/workdir/poky-dylan-9.0.1/build/downloads/git2/dev.omapzoom.org.pub.scm.integration.kernel-ubuntu.git'...
>>>>
>>>> fatal: The remote end hung up unexpectedly
>>>> fatal: early EOF
>>>> fatal: index-pack failed
>>> It seems you had your connection terminated unexpectedly... Have you
>>> tried it again? Does it happen every time?
>>> BTW, seems to work fine here...
>>
>> I ran into similar problems recently (strange git failure), but as I
>> didn't have strong need to build new stuff, I simply gave up straight
>> away and switched to another task.
>> The only "odd" thing I have here, is a *@#$! proxy. I am located in
>> New Zealand.
>
> And some of our engineers are having weird issues with the proxy as well.
> Probably a moon phase... :)
>
> --
> Denys
>
>
>>>> ERROR: Function failed: Fetcher failure for URL: 'git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>'. Unable to fetch URL from any source.
>>>> ERROR: Logfile of failure stored in: /home/prathamesh/workdir/poky-dylan-9.0.1/build/tmp-eglibc-eglibc/work/pandaboard-oe-linux-gnueabi/linux-omap4/3.4-r0/temp/log.do_fetch.4257
>>>> ERROR: Task 910 (/home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, do_fetch) failed with exit code '1'
>>>> NOTE: Tasks Summary: Attempted 2323 tasks of which 2231 didn't need to be rerun and 1 failed.
>>>> Waiting for 0 running tasks to finish:
>>>>
>>>> Summary: 1 task failed:
>>>>    /home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, do_fetch
>>>> Summary: There was 1 WARNING message shown.
>>>> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>>>>
>>>> Note:
>>>> 1. I have successfully built the foton-image for target vexpressa9, and it
>>>> boots without any errors in the qemu emulator.
>>>> 2. I am able to 'git clone' the above mentioned repository. If you could let
>>>> me know how can I use the local repository for build process. I tried
>>>> copying the repository in downloads folder, but it did not work somehow.
>>> You need to get a bare repository and place it into:
>>> downloads/git2/dev.omapzoom.org.pub.scm.integration.kernel-ubuntu.git
>>>
>>
>> _______________________________________________
>> meta-ti mailing list
>> meta-ti at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-ti
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
>