[meta-ti] OMAP5: Booting build output

[Ian Wisbon]

Chase,

I've got a 4-port USB serial adapter connected to my host, so, it
enumerates as ttyUSB5 on my host.

I'm connecting to the micro-USB port labeled DEBUG USB, and the LED
indicating debug power is lit, screen /dev/ttyUSB5 115200

Applying power, LEDs D1 and D2 light blue, but otherwise, nothing
lights; I don't see a link come up either on the eth port.

On Thu, 28 Mar 2013 17:42:26 -0400
"Maupin, Chase" <chase.maupin at ti.com> wrote:

> > -----Original Message-----
> > From: Ian Wisbon [mailto:ian.wisbon at timesys.com]
> > Sent: Thursday, March 28, 2013 4:35 PM
> > To: Maupin, Chase
> > Cc: meta-ti at yoctoproject.org
> > Subject: Re: [meta-ti] OMAP5: Booting build output
> > 
> > Chase,
> > 
> > Thanks - I have mine set to the same:
> > 
> > off-on-off-on
> > 
> > and still no luck booting. I also tried the reverse just in case
> > I was
> > backwards/upside-down; despite the same SD card booting an OMAP4
> > Panda,
> > and replacing with OMAP5 MLO and u-boot.img, I see nothing on the
> > console whatsoever. Not even a junk character implying an
> > incorrect
> > baudrate, etc. The USBBOOT functionality seems to work, so I
> > don't
> > believe the board to be non-functional.
> 
> Are you connected to ttyUSB0 or ttyUSB1?  For my board the serial is
> ttyUSB0.
> 
> > 
> > I'll sit tight for a while and see what else is committed. Thanks
> > for
> > your assistance!
> > 
> > 
> > > >
> > > > Does the SYSBOOT switch dictate whether the SD is used for
> > > > booting? If
> > > > so, what is the correct setting? I've previously attempted to
> > > > boot
> > > > using an SD card formatted as necessary for the OMAP4 Panda,
> > but
> > > > have
> > > > been unsuccessful - I assumed a similar FAT format would be
> > > > required
> > > > for MLO/u-boot.img
> > >
> > > My sysboot switch is off on off on and I'm booting from SD.
> > >
> > > You can use the same SD format at omap4.  Just replace the
> > kerel and
> > > bootloader, add the boot.scr and dtb file.

Thanks,


--
---
Ian Wisbon
Support Manager
Timesys Corporation