[meta-ti] libtool-cross_2.4.6.bb configure failure
Joshua Vanderpool
jdvdt2 at gmail.com
Wed Dec 9 03:23:25 PST 2015
The host is a 64 bit Ubuntu 14.04LTS machine.
I am using the 2013 version of the toolchain as found on the wiki.
Could the toolchain be built by the meta-linaro layer, removing the need
for the external toolchain?
Josh
On Tue, Dec 8, 2015 at 3:01 PM, Denys Dmytriyenko <denys at ti.com> wrote:
> What is your host machine and Linux distro?
>
> Also, which version of Linaro toolchain do you use? (with Fido we've
> switched
> to Linaro 2015.05 release, but I think the Wiki hasn't been updated yet)
>
> --
> Denys
>
>
> On Tue, Dec 08, 2015 at 02:10:55PM -0500, Joshua Vanderpool wrote:
> > I have used the instructions found here
> > http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment
> >
> > To setup a arago build of the am57xx-evm as a starting point. I then
> > ./oe-layertool-setup.sh -f configs/arago-fido-config.txt
> >
> > I assumed that this had support for the am57xx, however i have been
> > unsuccessful to build the core-image-minimal.
> >
> > I am using the compiler as stated in the wiki.
> >
> > once i get a build working then i have to add in my custom layers for the
> > board i designed.
> > I would like to know the layers i should use to have the best video
> support
> > at qt5 will be used and the video ports on the AM57xx.
> >
> > Thanks for any support and your time.
> >
> > Warning this is the output:
> >
> > jvanderpool at jvanderpool-workstation:~/dev/tisdk/build$
> MACHINE=am57xx-evm
> > bitbake core-image-minimal
> > NOTE: Started PRServer with DBfile:
> > /home/jvanderpool/dev/tisdk/build/cache/prserv.sqlite3, IP: 127.0.0.1,
> > PORT: 45120, PID: 13826
> > NOTE: Your conf/bblayers.conf has been automatically updated.
> > NOTE: INCLUDING gnutls as buildable despite INCOMPATIBLE_LICENSE because
> it
> > has been whitelisted### | ETA: 00:00:06
> > Parsing recipes: 100%
> >
> |####################################################################################|
> > Time: 00:01:15
> > Parsing of 2084 .bb files complete (0 cached, 2084 parsed). 2613 targets,
> > 376 skipped, 0 masked, 0 errors.
> > NOTE: Resolving any missing task queue dependencies
> >
> > Build Configuration:
> > BB_VERSION = "1.26.0"
> > BUILD_SYS = "x86_64-linux"
> > NATIVELSBSTRING = "Ubuntu-14.04"
> > TARGET_SYS = "arm-linux-gnueabi"
> > MACHINE = "am57xx-evm"
> > DISTRO = "arago"
> > DISTRO_VERSION = "2015.11"
> > TUNE_FEATURES = "arm armv7a vfp thumb neon callconvention-hard
> > cortexa15"
> > TARGET_FPU = "vfp-neon"
> > meta-arago-distro
> > meta-arago-extras = "master:0b4f6cf573446ee854c1b128aac59210e45d708b"
> > meta-qt5 = "jethro:0454fb083c38f2155a8be3b61930ad1ddf995695"
> > meta-networking
> > meta-ruby
> > meta-python
> > meta-oe = "fido:df2f700d66bace65f5d802225232d01cf511fe81"
> > meta-ti = "fido:bc10ffc2e4637a3c0cc020b686c93e92c93ee756"
> > meta-linaro-toolchain = "fido:08a46787862966f2236c5a9b3eb4d4ec68263593"
> > meta = "fido:f0873b83d693af4a103999160d67fcf25c7eedc1"
> >
> > NOTE: Preparing RunQueue
> > NOTE: Executing SetScene Tasks
> > NOTE: Executing RunQueue Tasks
> > WARNING: Failed to fetch URL
> > http://www.openssl.org/source/openssl-1.0.2d.tar.gz, attempting MIRRORS
> if
> > available
> > ERROR: Function failed: do_configure (log file is located at
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
> > ERROR: Logfile of failure stored in:
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265
> > Log data follows:
> > | DEBUG: Executing python function sysroot_cleansstate
> > | DEBUG: Python function sysroot_cleansstate finished
> > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
> 'common']
> > | DEBUG: Executing shell function autotools_preconfigure
> > | DEBUG: Shell function autotools_preconfigure finished
> > | DEBUG: Executing python function autotools_copy_aclocals
> > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
> 'common']
> > | DEBUG: Python function autotools_copy_aclocals finished
> > | DEBUG: Executing shell function do_configure
> > | automake (GNU automake) 1.15
> > | Copyright (C) 2014 Free Software Foundation, Inc.
> > | License GPLv2+: GNU GPL version 2 or later <
> > http://gnu.org/licenses/gpl-2.0.html>
> > | This is free software: you are free to change and redistribute it.
> > | There is NO WARRANTY, to the extent permitted by law.
> > |
> > | Written by Tom Tromey <tromey at redhat.com>
> > | and Alexandre Duret-Lutz <adl at gnu.org>.
> > | AUTOV is 1
> > | NOTE: Executing ACLOCAL="aclocal
> >
> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/"
> > autoreconf --verbose --install --force --exclude=libtoolize -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > | autoreconf: Entering directory `.'
> > | autoreconf: configure.ac: not using Gettext
> > | autoreconf: running: aclocal
> >
> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > --force -I m4
> > | autoreconf: configure.ac: tracing
> > | autoreconf: running:
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoconf
> >
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> >
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > --force
> > | autoreconf: running:
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoheader
> >
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> >
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > --force
> > | autoreconf: running: automake --add-missing --copy --force-missing
> > | autoreconf: running: gnu-configize
> > | autoreconf: Leaving directory `.'
> > | NOTE: Running
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/configure
> > --build=x86_64-linux --host=arm-linux-gnueabi
> > --target=arm-linux-gnueabi --prefix=/usr
> > --exec_prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin
> > --libexecdir=/usr/lib/libtool
> >
> --datadir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share
> > --sysconfdir=/etc --sharedstatedir=/com --localstatedir=/var
> > --libdir=/usr/lib
> > --includedir=/usr/include --oldincludedir=/usr/include
> >
> --infodir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/info
> >
> --mandir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/man
> > --disable-silent-rules --disable-dependency-tracking
> >
> --with-libtool-sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
> > | configure: loading site script
> >
> /home/jvanderpool/dev/tisdk/sources/meta-openembedded/meta-oe/site/endian-little
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/endian-little
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-common
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-32
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-linux
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-glibc
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-linux
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common
> > | ## ------------------------- ##
> > | ## Configuring libtool 2.4.6 ##
> > | ## ------------------------- ##
> > |
> > | checking for GNU M4 that supports accurate traces...
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> > | checking whether
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> > accepts --gnu... yes
> > | checking how m4 supports trace files... --debugfile
> > | checking for a BSD-compatible install... /usr/bin/install -c
> > | checking whether build environment is sane... yes
> > | checking for arm-linux-gnueabi-strip... arm-linux-gnueabihf-strip
> > | checking for a thread-safe mkdir -p... /bin/mkdir -p
> > | checking for gawk... gawk
> > | checking whether make sets $(MAKE)... yes
> > | checking whether make supports nested variables... yes
> > | checking whether make supports nested variables... (cached) yes
> > | checking build system type... x86_64-pc-linux-gnu
> > | checking host system type... arm-unknown-linux-gnueabi
> > | configure: autobuild project... GNU Libtool
> > | configure: autobuild revision... 2.4.6
> > | configure: autobuild hostname... jvanderpool-workstation
> > | configure: autobuild mode... default
> > | configure: autobuild timestamp... 20151208T160947Z
> > | checking for arm-linux-gnueabi-gcc... arm-linux-gnueabihf-gcc
> > -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon
> > -mtune=cortex-a15
> >
> --sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
> > | checking whether the C compiler works... no
> > | configure: error: in
> >
> `/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build':
> > | configure: error: C compiler cannot create executables
> > | See `config.log' for more details
> > | Configure failed. The contents of all config.log files follows to aid
> > debugging
> > | ERROR: oe_runconf failed
> > | WARNING:
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/run.do_configure.32265:1
> > exit 1 from
> > | exit 1
> > | ERROR: Function failed: do_configure (log file is located at
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
> > ERROR: Task 414
> >
> (/home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
> > libtool-cross_2.4.6.bb, do_configure) failed with exit code '1'
> > NOTE: Tasks Summary: Attempted 330 tasks of which 0 didn't need to be
> rerun
> > and 1 failed.
> > NOTE: Writing buildhistory
> > Waiting for 0 running tasks to finish:
> >
> > *** Please tell me who you are.
> >
> > Run
> >
> > git config --global user.email "you at example.com"
> > git config --global user.name "Your Name"
> >
> > to set your account's default identity.
> > Omit --global to set the identity only in this repository.
> >
> > fatal: unable to auto-detect email address (got
> > 'jvanderpool at jvanderpool-workstation.(none)')
> >
> > Summary: 1 task failed:
> >
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
> > libtool-cross_2.4.6.bb, do_configure
>
> > --
> > _______________________________________________
> > meta-ti mailing list
> > meta-ti at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-ti
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-ti/attachments/20151209/63ab97cb/attachment-0001.html>
More information about the meta-ti
mailing list