[meta-xilinx] unable to build meta-xilinx.

[Sipke Vriend]

Hi Anup,

It always helps if you can provide the summary provided at the 
start of bitbake build. We can then confirm which versions 
you are using of each layer.
If you are using dylan branch, then probably you will also need
meta-xilinx dylan branch.

Also please be aware that the machine names have recently 
changed in master, so you will need to look at 
meta-xilinx/conf/machine/* to confirm which to use.
Also, meta-xilinx master is currently following oe-core/poky 
master, so on any given day there may be a breakage, as is
currently in relation to DTS files, but your issue looks like a 
different one.

Regards
Sipke

>From: meta-xilinx-bounces at yoctoproject.org 
>[mailto:meta-xilinx-bounces at yoctoproject.org] On Behalf Of Anup Kini
>Sent: Monday, 19 August 2013 11:47 PM
>To: Philip Balister
>Cc: meta-xilinx at yoctoproject.org
>Subject: Re: [meta-xilinx] unable to build meta-xilinx.
>
>Thanks Philip,
>
>I downloaded the meta-zynq layer instead and followed the steps there.
>I am still not sure how to use the meta-xilinx layer i.e. the 
>MACHINE?= for zynq zc702 (will look into this later this week)
>Also, can u point me towards few cmake project layers, i am trying 
>to build one for Point Cloud Library (finally !!).
>
>
>On 19 August 2013 15:39, Philip Balister <philip at balister.org> wrote:
>Try
>
>export MACHINE="zedboard-zynq7"
>bitbake core-image-minimal
>
>You need to tell the system what machine you are building for, either on
>the command line, or by setting a machine in local.conf.
>
>Philip
>
>On 08/19/2013 08:54 AM, Anup Kini wrote:
>> Dear All,
>>
>> I am trying to build a core-minimal-image using meta-xilinx on the
>> poky-dylan-9.0.1.
>>
>> I am following the readme in this link:
>> https://github.com/Xilinx/meta-xilinx
>>
>> I have downloaded the meta-xilinx repo to
>> /home/akini/poky-dylan-9.0.1/meta-xilinx.
>> I have added the lines in bblayer.conf at
>> /home/akini/poky-dylan-9.0.1/build/conf/bblayers.conf
>> Also, added the machine ?= "zc702" in
>> /home/akini/poky-dylan-9.0.1/build/conf/local.conf
>>
>> when i run bitbake core-image-minial, i get the following errors:
>>
>> Pseudo is not present but is required, building this first before the main
>> build
>> ERROR:  OE-core's config sanity checker detected a potential
>> misconfiguration.
>>     Either fix the cause of this error or at your own risk disable the
>> checker (see sanity.conf).
>>     Following is the list of potential problems / advisories:
>>
>>     Please set a valid MACHINE in your local.conf or environment
>>
>> ERROR: Execution of event handler 'check_sanity_eventhandler' failed
>>
>>
>> Am i missing some steps in between ?
>> Kindly guide me to fix this error.
>>
>>
>>
>> _______________________________________________
>> meta-xilinx mailing list
>> meta-xilinx at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-xilinx
>>
>
>
>
>-- 
>Anup Kini
>Systems Engineer
>________________________________________
>Synapticon  |  Cyber-Physical System Solutions 
>Mobile:
>Direct: +49 151 / 638 646 73
>+49 7335 / 186 999 21 Fax: +49 7335 / 186 999 1 
>    synapticon.com  |  @synapticon_co
>Synapticon GmbH  |  Hohlbachweg 2  |  73344 Gruibingen, DE
>Secretary +49 7335 / 186 999 0  |  General Manager: Nikolai Ensslen 
>Registry Court Ulm HRB 725114  |  USt-ID DE271647127
>This message and any files transmitted with it are confidential and intended 
>solely for the use of the individual or entity to whom they are addressed. 
>Please notify the sender immediately if you have received this e-mail by 
>mistake and delete it from your system.