[meta-xilinx] Address location for binaries...

[Edward Vidal]

Hello Alan,
J2 & J6 grd V V grd grd on bank
If you look at meta-zynq meta-topic jan & feb you see that I had that
resetting issue and others.  Only after going to meta-topic would my
zedboard boot.  It had booted with 3.6 linux-digilent from sep to the end
of year both with a ram disk an from a 2nd partition.

Are other using meta-xilinx kernel with zedboard?
I also had u-boot problems with meta-xilinx which uses and earlier version?

mkfs -t vfat -n ZED_BOOT /dev/sdb1

cc60b3e6fed54ef4f44962a2435a5410  autorun.scr
7d078867fa2ac7ed37cb08e991a5a33b  BOOT.bin
153467ebf0d549aa5ced7a825f9e90bb  devicetree.dtb
82155135a72065f383c594f0c35a438d  uImage

mkfs -t ext4 -L ROOT_FS /dev/sdb2
tar xfz
/home/vidal/topic_oe020114/poky_build/zedboard/custom-image-zedboard.tar.gz

lsmod
Module                  Size  Used by
ipv6                  258832  24
pmodoled_gpio           7606  0
snd_soc_zed_adau1761     3515  0
snd_soc_adi_axi_i2s     3098  2
snd_soc_adv7511_hdmi     2443  1
snd_soc_adi_axi_spdif     3030  2
regmap_mmio             2573  2 snd_soc_adi_axi_spdif,snd_soc_adi_axi_i2s
adi_axi_hdmi            9755  0
drm_kms_cma_helper      5735  3 adi_axi_hdmi
syscopyarea             2739  1 drm_kms_cma_helper
sysfillrect             3000  1 drm_kms_cma_helper
sysimgblt               2024  1 drm_kms_cma_helper
clk_axi_clkgen          5561  0
adv7511                 9469  2 adi_axi_hdmi
drm_kms_helper         32445  3 adi_axi_hdmi,adv7511,drm_kms_cma_helper
xilinx_dma             11108  1
snd_soc_adau1761       16799  1
snd_soc_adau17x1       12855  1 snd_soc_adau1761
snd_soc_sigmadsp        2087  1 snd_soc_adau17x1
i2c_xiic                5952  0
uvcvideo               61991  0
videobuf2_vmalloc       2854  1 uvcvideo
videobuf2_memops        2114  1 videobuf2_vmalloc
videobuf2_core         29153  1 uvcvideo
ssh -Y 192.168.0.29
root at zedboard:~# uname -a
Linux zedboard 3.12.0 #1 SMP PREEMPT Thu Feb 6 20:18:33 MST 2014 armv7l
GNU/Linux

Status
* using dylan RPMs
** needing to use --force
linux 3.12.0 kernel running on zedboard okay
installed gnuradio-3.6.4.1 instead of gnuradio-3.6.5 okay Note *
gnuplot okay
gsl okay
java092113 RPMs okay
c920 camera modules okay
opencv facedetect okay Note *
oled okay
read_sw ???
vlc okay Note * & **
sound not working
Let me know if any of this helps


On Thu, Feb 20, 2014 at 1:16 AM, Alan DuBoff <aland at softorchestra.com>wrote:

>
> On Wed, February 19, 2014 9:40 pm, Alan DuBoff wrote:
> > On Wed, February 19, 2014 5:28 am, Edward Vidal wrote:
> >> I have attached several other files that I hope helps.
> >
> > One thing I notice at first glance is that you don't include the uImage
> in
> > your bootgen image file, and setting the u-boot.bin to 0x4000000.
> Hmmm...I
> > will try that. You still put the uImage on the BOOT partition and in
> /boot/ of
> > the rootfs, right?
>
> BTW, this didn't even boot my card, my images must be different than yours,
> oddly. You don't seem to have a ramdisk or kernel in there. Does that boot
> linux or just a u-boot prompt? Hmmm...
>
> --
> Cheers,
> Alan
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20140220/263c7c30/attachment.html>