[meta-xilinx] Problems booting

[Martin Townsend]

Hi,

For some reason I've started getting these errors during boot.  It still 
boots to the login prompt but I was wondering if anyone else has come 
across this or knows how to go about fixing it.  I'm building for 
Microblazeel (ML605 board).

Cheers,
Martin.

INIT: version 2.88 booting
Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such 
file or directory
bootlogd.
[   21.827969] kernel task_size exceed
[   21.852175] Oops: Exception in kernel mode, sig: 11
[   21.912423] CPU: 0 PID: 131 Comm: rc Not tainted 3.10.0xsilon-poky #1
[   21.989488] task: c3910580 ti: c3a68000 task.ti: c3a68000
[   22.054040]  Registers dump: mode=C3A69ED0
[   22.104059]  r1=00000005, r2=00000000, r3=00000000, r4=FFFFFFFA
[   22.174890]  r5=C0478C30, r6=00000800, r7=C3A69F68, r8=00000000
[   22.245722]  r9=1010A3C0, r10=00000000, r11=BF9390B0, r12=480DE45C
[   22.319671]  r13=00000000, r14=00000003, r15=C0005FE8, r16=00000000
[   22.394673]  r17=C0001948, r18=FFFFFFFC, r19=1010C108, r20=481BBFF4
[   22.469669]  r21=481C0470, r22=1005C324, r23=100C6FF8, r24=1010CE28
[   22.544654]  r25=00000000, r26=00000000, r27=00000000, r28=00000000
[   22.619657]  r29=00000000, r30=1007E164, r31=C3910580, rPC=C0001948
[   22.694652]  msr=000046A2, ear=FFFFFFFA, esr=00000472, fsr=1010C108
/etc/rcS.d/S37populate-volatile.sh: line 143:   129 
Done                    cat ${CFGFILE}
        130                       | grep -v "^#"
        131 Segmentation fault      | while read LINE; do
     eval `echo "$LINE" | sed -n "s/\(.*\)\ \(.*\) \(.*\)\ \(.*\)\ 
\(.*\)\ \(.*\)/TTYPE=\1 ; TUSER=\2; TGROUP=\3; TMODE=\4; TNAME=\5 
TLTARGET=\6/p"`; TNAME=${ROOT_DIR}${TNAME}; [ "${VERBOSE}" != "no" ] && 
echo "Checking for -${TNAME}-."; [ "${TTYPE}" = "l" ] && { 
TSOURCE="$TLTARGET"; [ "${VERBOSE}" != "no" ] && echo "Creating link 
-${TNAME}- pointing to -${TSOURCE}-."; link_file "${TSOURCE}" 
"${TNAME}"; continue; }; [ -L "${TNAME}" ] && { [ "${VERBOSE}" != "no" ] 
&& echo "Found link."; NEWNAME=`ls -l "${TNAME}" | sed -e 's/^.*-> 
\(.*\)$/\1/'`; echo ${NEWNAME} | grep -v "^/" > /dev/null && { 
TNAME="`echo ${TNAME} | sed -e 's@\(.*\)/.*@\1@'`/${NEWNAME}"; [ 
"${VERBOSE}" != "no" ] && echo "Converted relative linktarget to 
absolute path -${TNAME}-."; } || { TNAME="${NEWNAME}"; [ "${VERBOSE}" != 
"no" ] && echo "Using absolute link target -${TNAME}-."; }; }; case 
"${TTYPE}" in
         "f")
             [ "${VERBOSE}" != "no" ] && echo "Creating file 
-${TNAME}-."; create_file "${TNAME}" &
         ;;
         "d")
             [ "${VERBOSE}" != "no" ] && echo "Creating directory 
-${TNAME}-."; mk_dir "${TNAME}"
         ;;
         *)
             [ "${VERBOSE}" != "no" ] && echo "Invalid type 
-${TTYPE}-."; continue
         ;;
     esac;
done
Configuring network interfaces... ifup skipped for nfsroot interface eth0
run-parts: /etc/network/if-pre-up.d/nfsroot exited with code 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1