[meta-xilinx] Bitstream/Boot.bin/etc - Providers/Virtual targets

[Mike Looijmans]

On 03/17/2014 02:36 PM, Michal Simek wrote:
> Hi,
>
> (noisy critter) depends on board version you have - I have without cooler.
>
> Have you copied ps7_init.c/h files to proper location?

Yep. (scripting takes care of that step).


>
> Thanks,
> Michal
>
>
> On 03/17/2014 02:27 PM, Mike Looijmans wrote:
>> Just today I tried to boot a zc706 evaluation board (noisy critter) using u-boot SPL from master-next,
> but I can't get anything to happen on it. I've set the boot jumpers to "SD" mode (00110),
>   just like on the zc702, and connected a terminal line to the UART. Nothing comes out on power up,
>   even though only the serial and OCM need to be up and running at that point.
>>
>> I inserted the card into the zc702 board, and that one at least outputs a bit of boot messages.
>>
>> Anything I've missed on that board, or is the 706 not supported yet in this mode?
>>
>>
>> Met vriendelijke groet / kind regards,
>>
>> Mike Looijmans
>>
>> TOPIC Embedded Systems
>> Eindhovenseweg 32-C, NL-5683 KH Best
>> Postbus 440, NL-5680 AK Best
>> Telefoon: (+31) (0) 499 33 69 79
>> Telefax:  (+31) (0) 499 33 69 70
>> E-mail: mike.looijmans at topic.nl
>> Website: www.topic.nl
>>
>> Please consider the environment before printing this e-mail
>>
>>
>
>



Met vriendelijke groet / kind regards,

Mike Looijmans

TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) (0) 499 33 69 79
Telefax:  (+31) (0) 499 33 69 70
E-mail: mike.looijmans at topic.nl
Website: www.topic.nl

Please consider the environment before printing this e-mail