[meta-xilinx] Bitstream/Boot.bin/etc - Providers/Virtual targets

[Michal Simek]

Hi,

(noisy critter) depends on board version you have - I have without cooler.

Have you copied ps7_init.c/h files to proper location?

Thanks,
Michal


On 03/17/2014 02:27 PM, Mike Looijmans wrote:
> Just today I tried to boot a zc706 evaluation board (noisy critter) using u-boot SPL from master-next, 
but I can't get anything to happen on it. I've set the boot jumpers to "SD" mode (00110),
 just like on the zc702, and connected a terminal line to the UART. Nothing comes out on power up,
 even though only the serial and OCM need to be up and running at that point.
> 
> I inserted the card into the zc702 board, and that one at least outputs a bit of boot messages.
> 
> Anything I've missed on that board, or is the 706 not supported yet in this mode?
> 
> 
> Met vriendelijke groet / kind regards,
> 
> Mike Looijmans
> 
> TOPIC Embedded Systems
> Eindhovenseweg 32-C, NL-5683 KH Best
> Postbus 440, NL-5680 AK Best
> Telefoon: (+31) (0) 499 33 69 79
> Telefax:  (+31) (0) 499 33 69 70
> E-mail: mike.looijmans at topic.nl
> Website: www.topic.nl
> 
> Please consider the environment before printing this e-mail
> 
>