[meta-xilinx] Attempting to follow U-boot changes in 2015.07

[Mike Looijmans]

Found the issue, it was the "memory" node in the DT.


On 25-09-15 15:58, Mike Looijmans wrote:
> I was attempting to upgrade our bootloader by merging in the latest (based on
> 2015.07 u-boot) master-next from the xilinx repo.
>
> After adapting the stuff needed for the board definition (lots of Kconfig
> files and so moved to different locations), I got it to compile again.
> Strangely, the SPL loader runs fine, and it apparently reads the u-boot.img
> from SD card for the next stage. So the ps7_init data was correctly programmed
> (and hasn't changed) so the serial output and SD card run okay.
>
> But when SPL "jumps" to the "big" u-boot, it just reboots immediately and
> jumps back to the SPL loader, looping that way until the power switch puts it
> out of its misery.
>
> Anyone have any idea what critical step I missed here that might explain such
> behaviour?



Kind regards,

Mike Looijmans
System Expert

TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31 (0) 499 33 69 70
E-mail: mike.looijmans at topicproducts.com
Website: www.topicproducts.com

Please consider the environment before printing this e-mail