[meta-xilinx] failure : SD to u-boot SPL to u-boot on zcu102-zynqmp

[Jean-Francois Dagenais]

Correction on my last email...

> On Mar 23, 2017, at 21:07, Jean-Francois Dagenais <jeff.dagenais at gmail.com> wrote:
> 
> I dissected the problem I was having with my option 1. (today's masters on u-boot-xlnx and linux-xlnx) I have my prompt on the rootfs stored on part 2 of the SD card. Very basic sanity performed, need to go to bed now ;)

was using linux-xlnx so 2016.4 2762bc9163bb8576f63ff82801a65576f59e1e57 with the
patches in linux-xlnx_4.6.bb

On linux-xlnx master, I am probably stuck at the same place Mike Looijmans was:

Starting kernel ...

PMUFW: PmRequestWakeup: (NODE_APU_1, REQUEST_ACK_BLOCKING) PMUFW:
PmProcTrSleepToActive: SLEEP->ACTIVE NODE_APU_1 PMUFW: PmRequestWakeup:
(NODE_APU_2, REQUEST_ACK_BLOCKING) PMUFW: PmProcTrSleepToActive: SLEEP->ACTIVE
NODE_APU_2 PMUFW: PmRequestWakeup: (NODE_APU_3, REQUEST_ACK_BLOCKING) PMUFW:
PmProcTrSleepToActive: SLEEP->ACTIVE NODE_APU_3


... then nothing.


Maybe Michal can give a few pointers here?

Also, right now the meta-xilinx only deploys u-boot.bin, but the default build
of u-boot SPL expects both u-boot.img AND u-boot.bin. What's up with that?