[poky] Fullpass Test Report for Yocto 1.1 M1 RC2 - 20110528
Xu, Jiajun
jiajun.xu at intel.com
Tue Jun 7 07:15:20 PDT 2011
Hi all,
From RC2, QA will archive Test Report on wiki also.
Milestone test report could be found on https://wiki.pokylinux.org/wiki/Yocto_1.1_Milestone_Test_Report.
Future Weekly test report could be found on https://wiki.pokylinux.org/wiki/Yocto_1.1_Weekly_Test_Report.
Best Regards,
Jiajun
From: poky-bounces at yoctoproject.org [mailto:poky-bounces at yoctoproject.org] On Behalf Of Xu, Jiajun
Sent: Tuesday, June 07, 2011 12:36 PM
To: poky at pokylinux.org; yocto at yoctoproject.org
Subject: [poky] Fullpass Test Report for Yocto 1.1 M1 RC2 - 20110528
Hi all,
This is the fullpass test report for Yocto 1.1 M1 RC2 build. There are 3 new bugs found in this testing compared with weekly testing. Non-GPLv3 build could not work and one new LTP failure found with new kernel. The 2 BLOCK issues on have been addressed and a new build is ready for QA testing. Except for LTP and POSIX failures, there are 13 open bugs for RC2 build. Grub installation fails on 3 intel BSPs. Graphics testing on sugarbay is blocked because there are no mesa-demos and libSDL.so installed.
Helltest and Crashme could pass 24 hours testing on Jasperforest. Idle power consumption of sugarbay and crownbay are 40.12W and 18.72W respectively. LTP and POSIX testing is finished but the result analysis is still on-going.
Test Summary
---------------------------------------
Test Result Summary
Component
Target
Status
Comments
BSP
SugarBay
GOOD
Graphics testing is blocked; soft keyboard will be triggered with terminal icon;
CrownBay
GOOD
Grub installation failed;
JasperForest
GOOD
Everything runs well
Blacksand
GOOD
Grub installation failed; S3 does not work;
eMenlow
GOOD
System installation failed; S3 does not work;
Beagleboard
BLOCK
Build failed; A new build is ready and QA is doing testing for it;
Routerstationpro
GOOD
Everything runs well
Mpc8315e-rdb
Buggy
USB does not work
QEMU
qemux86
GOOD
Everything runs well
qemux86-64
GOOD
Everything runs well
qemuarm
GOOD
Everything runs well
qemuppc
GOOD
unfs does not work with qemuppc
qemumips
GOOD
Everything runs well
Core Build System
Buggy
non-GPLv3 build failed
Power/Performance
GOOD
Power consumption of sugarbay and crownbay are 40.12W and 18.72W respectively
Compliance
In analysis
LTP result: https://wiki.pokylinux.org/wiki/LTP_result
POSIX result: https://wiki.pokylinux.org/wiki/Posix_result
Stress
GOOD
Helltest and crashme could pass 24 hours testing
ADT
Buggy
unfs does not work with qemuppc
Critical bugs, more than 50% test cases are blocked
Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
Normal, Major and Critical bugs, more than 10% test cases failed
Detailed Test Result for each component
Target
Total TCs
Not Run
Passed
Failed
Not testable (Blocked)
Sugarbay Sato-SDK
64
0
60
1 (bug 1101)
3 (bug 1112, 883)
Crownbay Sato-SDK
60
0
55
1 (bug 1099)
4
Jasperforest LSB-SDK
34
0
34
0
0
n450 Sato-SDK
60
0
52
2 (bug 613, 1099)
6 (bug 613)
eMenlow Sato-SDK
60
0
48
2 (bug 1099, 503)
6 (bug 503)
Routerstationpro Sato-SDK
29
0
29
0
0
Mpc8315e-rdb Sato-SDK
30
0
26
4 (bug 766)
0
Qemux86-64 Sato
28
0
28
0
0
Qemux86-64 Sato-SDK
31
0
31
0
0
Qemux86 Sato
28
0
28
0
0
Qemux86 Sato-SDK
31
0
31
0
0
Qemumips Sato
26
0
26
0
0
Qemumips Sato-SDK
32
0
32
0
0
Qemuppc Sato
20
0
19
0
1 (bug 414)
Qemuppc Sato-SDK
26
0
25
0
1 (bug 414)
Qemuarm Sato
26
0
26
0
0
Qemuarm Sato-SDK
32
0
32
0
0
Core Build System
8
0
7
1 (bug 1133)
0
ADT
6
0
5
1 (bug 414)
0
Power/Performance
4
0
4
0
0
Stress
2
0
2
0
0
Total
637
0
600
12
21
* You can check the detailed test result in attachment for each target.
** The failed/blocked case number is listed with failed cases’ bug number.
Commit Information
---------------------------------------
Tree/Branch: Poky/1.1_M1
Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b
Meta Branch: 1.1_M1
Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298
Issue Summary
---------------------------------------
Component
Bug Number
Target Milestone
System & Core OS
Installation & Boot
Bug 1006: [mpc8315e-rdb & routerstationpro] minimal,sato,sato-sdk images boot failed (nightly build 20110423-1)
1.1
Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk live image
1.1 M2
Power Mangement
Bug 613: [Blacksand]system cannot enter S3 standby mode
1.1
Bug 503: [emenlow] system cannot enter S3 standby mode
1.1
Others
Bug 766: [mpc8315e-rdb] USB does not work on mpc8315e-rdb
1.0 M4
Bug 1101: keyboard pop up when clicking terminal icon
1.0 M2
Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand
1.1 M2
Bug 1097: The mouse can not click accurate to the icons in qemumips X
1.1 M2
Graphics
Bug 1112: [sugarbay] mesa-demos should be added into sato image for graphics testing
1.1 M2
Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image due to libsdl.so
1.1
Multimedia
Works well in sugarbay/n450/eMenlow/crownbay
Core Build System
New! Bug 1136: do_menuconfig for linux-yocto needs ${B} exists
New! Bug 1133: No provider for core-image-minimal/basic for non-GPLv3 build
1.1 M2
1.1 M2
Compliance
Compliance testing is finished, but result is still under analysis. LTP test result is on https://wiki.pokylinux.org/wiki/LTP_result
POSIX test result is on https://wiki.pokylinux.org/wiki/Posix_result
A new LTP failure is found and reported as bug 1138: [LTP] Some growfiles cases failed with Yocto 1.1 M1 build.
Stress
Helltest and Crashme could pass 24 hours testing
ADT
Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
1.1 M3
Best Regards,
Jiajun
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/poky/attachments/20110607/04056270/attachment.html>
More information about the poky
mailing list