[poky] Fullpass Test Report for Yocto 1.1 M1 RC2 - 20110528
Saul Wold
sgw at linux.intel.com
Tue Jun 7 11:10:41 PDT 2011
On 06/06/2011 09:36 PM, Xu, Jiajun wrote:
> Hi all,
>
> This is the fullpass test report for Yocto 1.1 M1 RC2 build. There are 3
> new bugs found in this testing compared with weekly testing. Non-GPLv3
> build could not work and one new LTP failure found with new kernel. The
> 2 BLOCK issues on have been addressed and a new build is ready for QA
> testing. Except for LTP and POSIX failures, there are 13 open bugs for
> RC2 build. Grub installation fails on 3 intel BSPs. Graphics testing on
> sugarbay is blocked because there are no mesa-demos and libSDL.so installed.
>
Jiajun, Yi Zhao,
What's the status of the Beagleboard testing, you show blocked below,
but I thought we unblocked last week, so is there any update on the
status of beagleboard testing? We need to know this since we have a
conditional GO decision based on these results.
I would like to also understand the sugarbay graphics testing, this is
not a blocker, it's a new requirement, correct? We have not had
mesa-demos included in any past release. I am going to add it to the
sato-sdk build only, will that be?
Sau!
> Helltest and Crashme could pass 24 hours testing on Jasperforest. Idle
> power consumption of sugarbay and crownbay are 40.12W and 18.72W
> respectively. LTP and POSIX testing is finished but the result analysis
> is still on-going.
>
> *Test Summary*
>
> *---------------------------------------*
>
>
>
>
>
>
>
>
>
>
>
> *Test Result Summary*
>
>
>
> *Component*
>
>
>
> *Target*
>
>
>
> *Status*
>
>
>
> *Comments*
>
>
>
> *BSP*
>
>
>
> SugarBay
>
>
>
> GOOD
>
>
>
> Graphics testing is blocked; soft keyboard will be triggered with
> terminal icon;
>
>
>
>
>
>
>
> CrownBay
>
>
>
> GOOD
>
>
>
> Grub installation failed;
>
>
>
>
>
>
>
> JasperForest
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> Blacksand
>
>
>
> GOOD
>
>
>
> Grub installation failed; S3 does not work;
>
>
>
>
>
>
>
> eMenlow
>
>
>
> GOOD
>
>
>
> System installation failed; S3 does not work;
>
>
>
>
>
>
>
> Beagleboard
>
>
>
> BLOCK
>
>
>
> Build failed; A new build is ready and QA is doing testing for it;
>
>
>
>
>
>
>
> Routerstationpro
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> Mpc8315e-rdb
>
>
>
> Buggy
>
>
>
> USB does not work
>
>
>
> *QEMU*
>
>
>
> qemux86
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> qemux86-64
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> qemuarm
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
>
>
> qemuppc
>
>
>
> GOOD
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
>
>
> qemumips
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
> *Core Build System*
>
>
>
>
>
>
>
> Buggy
>
>
>
> non-GPLv3 build failed
>
>
>
> *Power/Performance*
>
>
>
>
>
>
>
> GOOD
>
>
>
> Power consumption of sugarbay and crownbay are 40.12W and 18.72W
> respectively
>
>
>
> *Compliance*
>
>
>
>
>
>
>
> In analysis
>
>
>
> LTP result: https://wiki.pokylinux.org/wiki/LTP_result
> POSIX result: https://wiki.pokylinux.org/wiki/Posix_result
>
>
>
> *Stress*
>
>
>
>
>
>
>
> GOOD
>
>
>
> Helltest and crashme could pass 24 hours testing
>
>
>
> *ADT*
>
>
>
>
>
>
>
> Buggy
>
>
>
> unfs does not work with qemuppc
>
>
>
>
>
> **
>
>
>
>
>
> Critical bugs, more than 50% test cases are blocked
>
>
>
>
>
>
>
> Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
>
>
>
>
>
>
>
> Normal, Major and Critical bugs, more than 10% test cases failed
>
>
>
>
>
>
> *Detailed Test Result for each component*
>
>
>
> *Target*
>
>
>
> *Total TCs***
>
>
>
> *Not Run*
>
>
>
> *Passed***
>
>
>
> *Failed***
>
>
>
> *Not testable (Blocked)***
>
>
>
> *Sugarbay Sato-SDK*
>
>
>
> 64
>
>
>
> 0
>
>
>
> 60
>
>
>
> 1 (bug 1101)
>
>
>
> 3 (bug 1112, 883)
>
>
>
> *Crownbay Sato-SDK*
>
>
>
> 60
>
>
>
> 0
>
>
>
> 55
>
>
>
> 1 (bug 1099)
>
>
>
> 4
>
>
>
> *Jasperforest LSB-SDK*
>
>
>
> 34
>
>
>
> 0
>
>
>
> 34
>
>
>
> 0
>
>
>
> 0
>
>
>
> *n450 Sato-SDK*
>
>
>
> 60
>
>
>
> 0
>
>
>
> 52
>
>
>
> 2 (bug 613, 1099)
>
>
>
> 6 (bug 613)
>
>
>
> *eMenlow Sato-SDK*
>
>
>
> 60
>
>
>
> 0
>
>
>
> 48
>
>
>
> 2 (bug 1099, 503)
>
>
>
> 6 (bug 503)
>
>
>
> *Routerstationpro Sato-SDK*
>
>
>
> 29
>
>
>
> 0
>
>
>
> 29
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Mpc8315e-rdb Sato-SDK*
>
>
>
> 30
>
>
>
> 0
>
>
>
> 26
>
>
>
> 4 (bug 766)
>
>
>
> 0
>
>
>
> *Qemux86-64 Sato*
>
>
>
> 28
>
>
>
> 0
>
>
>
> 28
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemux86-64 Sato-SDK*
>
>
>
> 31
>
>
>
> 0
>
>
>
> 31
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemux86 Sato*
>
>
>
> 28
>
>
>
> 0
>
>
>
> 28
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemux86 Sato-SDK*
>
>
>
> 31
>
>
>
> 0
>
>
>
> 31
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemumips Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemumips Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemuppc Sato*
>
>
>
> 20
>
>
>
> 0
>
>
>
> 19
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
> *Qemuppc Sato-SDK*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 25
>
>
>
> 0
>
>
>
> 1 (bug 414)
>
>
>
> *Qemuarm Sato*
>
>
>
> 26
>
>
>
> 0
>
>
>
> 26
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Qemuarm Sato-SDK*
>
>
>
> 32
>
>
>
> 0
>
>
>
> 32
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Core Build System*
>
>
>
> 8
>
>
>
> 0
>
>
>
> 7
>
>
>
> 1 (bug 1133)
>
>
>
> 0
>
>
>
> *ADT*
>
>
>
> 6
>
>
>
> 0
>
>
>
> 5
>
>
>
> 1 (bug 414)
>
>
>
> 0
>
>
>
> *Power/Performance*
>
>
>
> 4
>
>
>
> 0
>
>
>
> 4
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Stress*
>
>
>
> 2
>
>
>
> 0
>
>
>
> 2
>
>
>
> 0
>
>
>
> 0
>
>
>
> *Total*
>
>
>
> 637
>
>
>
> 0
>
>
>
> 600
>
>
>
> 12
>
>
>
> 21
>
>
>
>
>
> **
>
>
>
>
>
>
> * You can check the detailed test result in attachment for each target.
>
> ** The failed/blocked case number is listed with failed cases’ bug number.
>
> *Commit Information*
>
> *---------------------------------------*
>
> Tree/Branch: Poky/1.1_M1
>
> Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b
>
> Meta Branch: 1.1_M1
>
> Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298
>
> *Issue Summary*
>
> *---------------------------------------*
>
> *Component*
>
>
>
> *Bug Number*
>
>
>
> *Target Milestone*
>
> *System & Core OS*
>
>
>
> *Installation & Boot*
>
>
>
> Bug 1006: [mpc8315e-rdb & routerstationpro] minimal,sato,sato-sdk images
> boot failed (nightly build 20110423-1)
>
>
>
> 1.1
>
> Bug 1099: [blacksand/emenlow/crownbay] grub install failed with sato-sdk
> live image
>
>
>
> 1.1 M2
>
> *Power Mangement*
>
>
>
> Bug 613: [Blacksand]system cannot enter S3 standby mode
>
>
>
> 1.1
>
> Bug 503: [emenlow] system cannot enter S3 standby mode
>
>
>
> 1.1
>
> *Others*
>
>
>
> Bug 766: [mpc8315e-rdb] USB does not work on mpc8315e-rdb
>
>
>
> 1.0 M4
>
> Bug 1101: keyboard pop up when clicking terminal icon
>
>
>
> 1.0 M2
>
> Bug 1107: Open or add person in contacts may segfault on sugarbay/blacksand
>
>
>
> 1.1 M2
>
> Bug 1097: The mouse can not click accurate to the icons in qemumips X
>
>
>
> 1.1 M2
>
> *Graphics*
>
>
>
> Bug 1112: [sugarbay] mesa-demos should be added into sato image for
> graphics testing
>
>
>
> 1.1 M2
>
> Bug 883: [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image
> due to libsdl.so
>
>
>
> 1.1
>
> *Multimedia*
>
>
>
> Works well in sugarbay/n450/eMenlow/crownbay
>
>
>
>
>
> *Core Build System*
>
>
>
> New!Bug 1136: do_menuconfig for linux-yocto needs ${B} exists
>
> New!Bug 1133: No provider for core-image-minimal/basic for non-GPLv3 build
>
>
>
> 1.1M2
>
> 1.1 M2
>
> *Compliance*
>
>
>
> Compliance testing is finished, but result is still under analysis. LTP
> test result is on https://wiki.pokylinux.org/wiki/LTP_result
>
> POSIX test result is on https://wiki.pokylinux.org/wiki/Posix_result
>
> A new LTP failure is found and reported as bug 1138: [LTP] Some
> growfiles cases failed with Yocto 1.1 M1 build.
>
>
>
>
>
> *Stress*
>
>
>
> Helltest and Crashme could pass 24 hours testing
>
>
>
>
>
> *ADT*
>
>
>
> Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
>
>
>
> 1.1 M3
>
> Best Regards,
>
> Jiajun
>
>
>
> _______________________________________________
> poky mailing list
> poky at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
More information about the poky
mailing list