[Toaster] [PATCH v5 00/19] per project build directory

[Ed Bartosh]

Hi Belen,

Thank you for testing!

See my comments below.

On Thu, Mar 17, 2016 at 05:20:59PM +0000, Barros Pena, Belen wrote:
> On 16/03/2016 12:05, "toaster-bounces at yoctoproject.org on behalf of Ed
> Bartosh" <toaster-bounces at yoctoproject.org on behalf of
> ed.bartosh at linux.intel.com> wrote:
> 
> >Hi,
> >
> >Default build directory is not going to be used for project builds
> >anymore.
> >It can be used only for command line builds. Toaster will use
> >build-toaster-<project id>
> >directories for project builds.
> 
> FWIW, this seems to be working for me. I have built master, jethro, local
> and from cli. 
> 
> Some things to keep in mind, once the series is upstream:
> 
> 1. Projects should be sharing sstate and downloads directories by default.
> Right not they don't, and my testing because of that was painfully slow (I
> had to run a clean build every time). I am not sure if Sujith's patches
> are enough for this
> (https://lists.yoctoproject.org/pipermail/toaster/2016-February/003832.html
> ) or if something else needs to be done. Ed: would you be able to have a
> look to Sujith's branch once you are done with this
>
Sure, I'm going to look at it.

What should be default values for DL_DIR and SSTATE_DIR?
Would something like $(TOPDIR)/../downloads and $(TOPDIR)/../sstate-cache be ok?

> 2. No toaster_ui.log file is created inside the /build directory, which is
> where cli builds are run. This might be expected, though.
>
Are you sure?
They should be created in build-toaster-<project id>/ directories.

> 3. The _meta-toaster-custom layer for the custom images should be created
> inside each project build directory: it should not be shared across
> projects (right now it is, since it is in the source root directory)
>
Makes sense to me. I'll try to do it after looking at Sujith patchset.

Regards,
Ed

> Cheers
> 
> Belén
> 
> >
> >This is how to test this:
> > - run toaster
> > - run command line build: build zlib
> > - check if it's shown in Toaster UI
> > - create project for Yocto master
> > - trigger project build from UI
> > - wait until it succeeds
> > - create project for Jethro
> > - trigger project build from UI
> > - wait until it succeds
> > - check that 2 build directories build-toaster-<project id> exist and
> >contain
> >   correct conf/toaster.conf and conf/bblayers.conf
> >
> >Changes in v2: stop bitbake server after the build
> >Changes in v3: fixed '/bin/sh: 1: source: not found' dash issue
> >               used project id in build directory name
> >               added 'INHERIT+='toaster buildhistory' to conf/local.conf
> >on toaster start
> >Changes in v4: fixed builds on Ubuntu caused by dash being default shell
> >Changes in v5: fixed nasty bug in toasterui causing it to stuck in event
> >loop
> >
> >The following changes since commit
> >01ab10ddaf21e34d8b3578975d1494cf0cfa4ef7:
> >
> >  toaster.bbclass: show packages that were setscened into existence too
> >(2016-03-10 15:58:34 +0000)
> >
> >are available in the git repository at:
> >
> >  git://git.yoctoproject.org/poky-contrib
> >ed/toaster/project-build-dir-7880
> >  
> >http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=ed/toaster/projec
> >t-build-dir-7880
> >
> >Ed Bartosh (18):
> >  toaster: don't start bitbake server
> >  toaster: get rid of noui option
> >  toaster: set BITBAKE_UI environment variable
> >  toasterui: add brbe parameter to buildinfohelper
> >  uievent: improve BBUIEventQueue code
> >  buildinfohelper: improve handling of providermap
> >  toasterui: fix brbe reporting
> >  toaster: remove startBBServer API
> >  toaster: remove release API
> >  toaster: add brbe parameter to triggerBuild
> >  toaster: modified setLayers API
> >  toaster: reimplement triggerBuild
> >  toaster: add new parameter to _shellcmd
> >  toaster: stop bitbake server after the build
> >  toaster: update conf/local.conf
> >  toaster: fix jethro build
> >  toaster: use bash explicitly
> >  toasterui: shutdown on BuildCompleted event
> >
> >Elliot Smith (1):
> >  toasterui: detect build run start correctly on Jethro
> >
> > bitbake/bin/toaster                                |  79 ++---------
> > bitbake/lib/bb/ui/buildinfohelper.py               |  48 +++----
> > bitbake/lib/bb/ui/toasterui.py                     |  48 ++++---
> > bitbake/lib/bb/ui/uievent.py                       |  10 +-
> > bitbake/lib/toaster/bldcontrol/bbcontroller.py     |  33 -----
> > .../toaster/bldcontrol/localhostbecontroller.py    | 146
> >++++++++++-----------
> > .../bldcontrol/management/commands/runbuilds.py    |   6 +-
> > 7 files changed, 147 insertions(+), 223 deletions(-)
> >
> >--
> >Regards,
> >Ed
> >-- 
> >_______________________________________________
> >toaster mailing list
> >toaster at yoctoproject.org
> >https://lists.yoctoproject.org/listinfo/toaster
> 

-- 
--
Regards,
Ed