[meta-xilinx] should elvis' meta-xilinx layer be synced with poky right now?

[Robert P. J. Day]

On Fri, 19 Apr 2013, Elvis Dowson wrote:

> Hi Robert,
>                     I've updated the master and
> master-xilinx-zc702-gcc-4.7 branches, so that it will build with the
> latest poky master as of today.
>
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx/
>
> I've built and tested using the Xilinx ISE PlanAhead 14.5 tool
> chain.
>
> Choose the appropriate TRD while building. I've tested this with the
> Zynq Base TRD as described here
>
> http://www.wiki.xilinx.com/Zynq+Base+TRD+14.4
>
> Don't forget to use the appropriate devicetree file to enable the
> various peripherals (HDMI, etc) for the board. The default one
> generated from the yocto build process will only enable the console
> one, with no HDMI, but if you need to use HDMI, either use a
> pre-compiled binary or specify the appropriate devicetree file
> (*.dts) in the kernel recipe to build as part of the build process.

  just to be clear, i have a zedboard while your layer doesn't
specifically define a zedboard machine, but i should still be able to
build a perfectly compatible u-boot i can bring up, i think i can just
use a zynq-7-zc702 machine for that, yes?

rday


-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================