39 Checking for Vulnerabilities

39.1 Vulnerabilities in Poky and OE-Core

The Yocto Project has an infrastructure to track and address unfixed known security vulnerabilities, as tracked by the public Common Vulnerabilities and Exposures (CVE) database.

The Yocto Project maintains a list of known vulnerabilities for packages in Poky and OE-Core, tracking the evolution of the number of unpatched CVEs and the status of patches. Such information is available for the current development version and for each supported release.

Security is a process, not a product, and thus at any time, a number of security issues may be impacting Poky and OE-Core. It is up to the maintainers, users, contributors and anyone interested in the issues to investigate and possibly fix them by updating software components to newer versions or by applying patches to address them. It is recommended to work with Poky and OE-Core upstream maintainers and submit patches to fix them, see “Contributing Changes to a Component” for details.

39.2 Vulnerability check at build time

To enable a check for CVE security vulnerabilities using cve-check.bbclass in the specific image or target you are building, add the following setting to your configuration:

INHERIT += "cve-check"

The CVE database contains some old incomplete entries which have been deemed not to impact Poky or OE-Core. These CVE entries can be excluded from the check using build configuration:

include conf/distro/include/cve-extra-exclusions.inc

With this CVE check enabled, BitBake build will try to map each compiled software component recipe name and version information to the CVE database and generate recipe and image specific reports. These reports will contain:

  • metadata about the software component like names and versions

  • metadata about the CVE issue such as description and NVD link

  • for each software component, a list of CVEs which are possibly impacting this version

  • status of each CVE: Patched, Unpatched or Ignored

The status Patched means that a patch file to address the security issue has been applied. Unpatched status means that no patches to address the issue have been applied and that the issue needs to be investigated. Ignored means that after analysis, it has been deemed to ignore the issue as it for example affects the software component on a different operating system platform.

After a build with CVE check enabled, reports for each compiled source recipe will be found in build/tmp/deploy/cve.

For example the CVE check report for the flex-native recipe looks like:

$ cat poky/build/tmp/deploy/cve/flex-native
LAYER: meta
PACKAGE NAME: flex-native
PACKAGE VERSION: 2.6.4
CVE: CVE-2016-6354
CVE STATUS: Patched
CVE SUMMARY: Heap-based buffer overflow in the yy_get_next_buffer function in Flex before 2.6.1 might allow context-dependent attackers to cause a denial of service or possibly execute arbitrary code via vectors involving num_to_read.
CVSS v2 BASE SCORE: 7.5
CVSS v3 BASE SCORE: 9.8
VECTOR: NETWORK
MORE INFORMATION: https://nvd.nist.gov/vuln/detail/CVE-2016-6354

LAYER: meta
PACKAGE NAME: flex-native
PACKAGE VERSION: 2.6.4
CVE: CVE-2019-6293
CVE STATUS: Ignored
CVE SUMMARY: An issue was discovered in the function mark_beginning_as_normal in nfa.c in flex 2.6.4. There is a stack exhaustion problem caused by the mark_beginning_as_normal function making recursive calls to itself in certain scenarios involving lots of '*' characters. Remote attackers could leverage this vulnerability to cause a denial-of-service.
CVSS v2 BASE SCORE: 4.3
CVSS v3 BASE SCORE: 5.5
VECTOR: NETWORK
MORE INFORMATION: https://nvd.nist.gov/vuln/detail/CVE-2019-6293

For images, a summary of all recipes included in the image and their CVEs is also generated in textual and JSON formats. These .cve and .json reports can be found in the tmp/deploy/images directory for each compiled image.

At build time CVE check will also throw warnings about Unpatched CVEs:

WARNING: flex-2.6.4-r0 do_cve_check: Found unpatched CVE (CVE-2019-6293), for more information check /poky/build/tmp/work/core2-64-poky-linux/flex/2.6.4-r0/temp/cve.log
WARNING: libarchive-3.5.1-r0 do_cve_check: Found unpatched CVE (CVE-2021-36976), for more information check /poky/build/tmp/work/core2-64-poky-linux/libarchive/3.5.1-r0/temp/cve.log

It is also possible to check the CVE status of individual packages as follows:

bitbake -c cve_check flex libarchive

39.3 Fixing CVE product name and version mappings

By default, cve-check.bbclass uses the recipe name BPN as CVE product name when querying the CVE database. If this mapping contains false positives, e.g. some reported CVEs are not for the software component in question, or false negatives like some CVEs are not found to impact the recipe when they should, then the problems can be in the recipe name to CVE product mapping. These mapping issues can be fixed by setting the CVE_PRODUCT variable inside the recipe. This defines the name of the software component in the upstream NIST CVE database.

The variable supports using vendor and product names like this:

CVE_PRODUCT = "flex_project:flex"

In this example the vendor name used in the CVE database is flex_project and the product is flex. With this setting the flex recipe only maps to this specific product and not products from other vendors with same name flex.

Similarly, when the recipe version PV is not compatible with software versions used by the upstream software component releases and the CVE database, these can be fixed using the CVE_VERSION variable.

Note that if the CVE entries in the NVD database contain bugs or have missing or incomplete information, it is recommended to fix the information there directly instead of working around the issues possibly for a long time in Poky and OE-Core side recipes. Feedback to NVD about CVE entries can be provided through the NVD contact form.

39.4 Fixing vulnerabilities in recipes

If a CVE security issue impacts a software component, it can be fixed by updating to a newer version of the software component or by applying a patch. For Poky and OE-Core master branches, updating to a newer software component release with fixes is the best option, but patches can be applied if releases are not yet available.

For stable branches, it is preferred to apply patches for the issues. For some software components minor version updates can also be applied if they are backwards compatible.

Here is an example of fixing CVE security issues with patch files, an example from the ffmpeg recipe:

SRC_URI = "https://www.ffmpeg.org/releases/${BP}.tar.xz \
           file://0001-libavutil-include-assembly-with-full-path-from-sourc.patch \
           file://fix-CVE-2020-20446.patch \
           file://fix-CVE-2020-20453.patch \
           file://fix-CVE-2020-22015.patch \
           file://fix-CVE-2020-22021.patch \
           file://fix-CVE-2020-22033-CVE-2020-22019.patch \
           file://fix-CVE-2021-33815.patch \

A good practice is to include the CVE identifier in both the patch file name and inside the patch file commit message using the format:

CVE: CVE-2020-22033

CVE checker will then capture this information and change the CVE status to Patched in the generated reports.

If analysis shows that the CVE issue does not impact the recipe due to configuration, platform, version or other reasons, the CVE can be marked as Ignored using the CVE_CHECK_IGNORE variable. As mentioned previously, if data in the CVE database is wrong, it is recommend to fix those issues in the CVE database directly.

Recipes can be completely skipped by CVE check by including the recipe name in the CVE_CHECK_SKIP_RECIPE variable.

39.5 Implementation details

Here’s what the cve-check.bbclass class does to find unpatched CVE IDs.

First the code goes through each patch file provided by a recipe. If a valid CVE ID is found in the name of the file, the corresponding CVE is considered as patched. Don’t forget that if multiple CVE IDs are found in the filename, only the last one is considered. Then, the code looks for CVE: CVE-ID lines in the patch file. The found CVE IDs are also considered as patched.

Then, the code looks up all the CVE IDs in the NIST database for all the products defined in CVE_PRODUCT. Then, for each found CVE:

  • If the package name (PN) is part of CVE_CHECK_SKIP_RECIPE, it is considered as Patched.

  • If the CVE ID is part of CVE_CHECK_IGNORE, it is set as Ignored.

  • If the CVE ID is part of the patched CVE for the recipe, it is already considered as Patched.

  • Otherwise, the code checks whether the recipe version (PV) is within the range of versions impacted by the CVE. If so, the CVE is considered as Unpatched.

The CVE database is stored in DL_DIR and can be inspected using sqlite3 command as follows:

sqlite3 downloads/CVE_CHECK/nvdcve_1.1.db .dump | grep CVE-2021-37462

When analyzing CVEs, it is recommended to:

  • study the latest information in CVE database.

  • check how upstream developers of the software component addressed the issue, e.g. what patch was applied, which upstream release contains the fix.

  • check what other Linux distributions like Debian did to analyze and address the issue.

  • follow security notices from other Linux distributions.

  • follow public open source security mailing lists for discussions and advance notifications of CVE bugs and software releases with fixes.